Du har ingen produkter i handlekurven.
DJI Matrice 600 og 1 RC
50,390 kr inkl. mva
I esken inngår:
- DJI Matrice 600
- RC Sender
- A3 Flight Controller
- Ligtbridge 2
- GPS-Compass Pro
- 6 stk. Batterier (TB47S)
- 1 stk Lader
- 2 stk Lade Hub
- 1 Sett Propeller
- Manual (Engelsk)
Vi tar bort fraktkostnadene etter at bestillingen er gjennomført!
Tomt på lager
DJI Matrice 600 med 1 RC, A3 Flight contoller, Lightbridge 2, uten gimbal og kamera
Dette er DJI’s nye flygende plattform for det profesjonelle filmskaper og TV miljøet som gir muligheten for å velge i en stor variasjon av kameraer. Lang flytid gir optimale muligheter i krevende oppdrag.
DJI Matrice 600 Kommer ikke ferdig montert.
- Designed for filmmakers and industrial applications
- Multiple gimbals supported including the Ronin-MX
- A3 and Lightbridge 2 built-in
- Extended flight time and long range transmission
- Professional HD transmission
- Powerful app control
- SDK supported
- Upgradeable with A3 PRO and D-RTK GNSS
The Matrice 600 (M600) is DJI’s new flying platform designed for professional aerial photography and industrial applications. It is built to closely integrate with a host of powerful DJI technologies, including the A3 flight controller, Lightbridge 2 transmission system, Intelligent Batteries and Battery Management system, for maximum performance and quick setup.
The modular design makes the M600 easy to set up and ready to use in just minutes. Its dust proof propulsion systems simplify maintenance while actively cooled motors make for reliable operation during extended periods of time. All Zenmuse cameras and gimbals are natively compatible, and a maximum payload of 6 kg allows it to fly the Ronin-MX gimbal and a range of cameras from Micro Four Thirds systems to the RED Epic.
SMART FLIGHT SAFETY
The M600 uses sine-wave driven, intelligent ESCs to ensure it performs accurately, safely and efficiently while A3’s self-adaptive flight systems adjust flight parameters automatically based on different payloads. The A3 can be upgraded with two additional GNSS and IMU units to A3 Pro or with D-RTK GNSS for enhanced accuracy.*
*A3 Pro and D-RTK GNSS are sold separately.
With triple modular redundancy and diagnostic algorithms that compare sensor data from the three sets of units in real-time, the A3 Pro ensures that the M600 flies exactly as expected.
A3 Pro are sold separately.
The A3 GNSS system can be upgraded with centimeter-level accuracy. Using dual antennas, its heading reference is more accurate than a compass sensor, and it is able to withstand magnetic interference from metal structures.
D-RTK GNSS are sold separately.
EXTENDED FLIGHT TIME AND TRANSMISSION RANGE
The M600 features an extended flight time and a 5 km* long-range, ultra-low latency HD image transmission for accurate image composition and capture. By using 6 small DJI Intelligent Batteries, allowing it to easily be shipped to wherever it is needed. A customized battery management system and power distribution board allows all six batteries to be turned on with one button press, and keeps the system in flight in the event of a failure of a single battery, and allows users to check the battery status in real-time during flight.
PROFESSIONAL HD TRANSMISSION
DJI Lightbridge 2 has been designed from the ground up to meet the requirements of professional broadcasting, offering high frame rates and HD live streaming. USB, mini-HDMI and 3G-SDI ports support video output at up to 1080p/60fps or a broadcast standard output of 720p/59.94fps and 1080i/50fps.
POWERFUL APP CONTROL
The M600 supports the DJI GO app and the brand new DJI Assistant 2. Get a live HD view, battery status, redundancy status, transmission strength and much more, straight from the DJI GO app. DJI GO is also the control center for the camera, giving access to shutter speed, ISO, photo or video capture on any Zenmuse X series camera and remote focus and aperture on the Zenmuse X5 and X5R cameras. The brand new DJI Assistant 2 supports firmware updates and the new Ground Station, and comes with a built-in flight simulator.
OPEN TO DEVELOPMENT
The M600 is fully compatible with the DJI Onboard SDK and Mobile SDK to meet the requirements of those building software for industrial applications. It has a dual parallel CAN and API ports for connecting DJI devices including the D-RTK GNSS units or third party components of your choice.
For spesifikasjoner trykk på linken her for gå til DJI Matrice 600 sin spesifikasjon side. Der “FCC” og “CE” fremkommer i spesifikasjonene er det CE som gjelder for Europa.
DJI Insire 2 og Zenmuse X5S med 5.2K er så bra at dronen med kamera er brukt til å ta opp hele kortfilmen The Circle.
Spesifikasjon og informasjon er oppgitt av produsenten. Med forbehold om feil.
|Dimensjoner||64 x 54 x 35 cm|
Venstrehånd – Mode 2
Multirotor x 6
|FPV Live Veiw||