GB203 Gimbal for GoPro

The included GB2013 gimbal allows you to mount a GoPro on the Typhoon G. The gimbal provides three axes of stabilization. It can pitch (tilt) +75 to -120-degrees, roll (cant) ±45-degrees, and yaw (pan) ±45-degrees. The gimbal powers directly from the flight battery. It works with the HERO3, HERO3+, HERO4 Black, and HERO4 Silver

To relay video back to the ground end, the MK58 Digital Video Downlink is included. This allows you to view a live image on the display of the ST10+’s 5.5″ screen

ST10+ Transmitter/Personal Ground Station

Transmitter (hand-held radio controller) and ground station system are combined into one device with the 10-channel ST10+. It features a 2.4 GHz transmitter for joystick operation of the quadcopter. In addition, there is a 5.8 GHz-range receiver for the video feed from the camera plus telemetry data. Updates over the original ST10 include a brighter touchscreen that is now 5.5″ in size. The screen plus embedded Android OS enables you to view a live feed from the video transmitter complete with telemetry data overlaid (OSD)

Flight Control Features

No-Fly Database

The Typhoon G flight computer has access to a database of published FAA no-fly areas – such as zones near airports. Additionally, the maximum flight altitude can be locked to remain below 400′ AGL (above ground level) for further compliance

Flight Modes

Smart Mode

Designed for beginners, this mode uses GPS to establish a 26′ «SAFE Circle» around the pilot. Stick relativity is maintained, meaning the aircraft will move in the same direction the stick is pressed is relative to the pilot, regardless of which way the quadcopter’s actual «nose» is pointing. A «virtual barrier» imposes maximum radius of 300′, help to ensure visual with the quadcopter is always maintained

Angle Mode

This mode is optimized for experienced pilots using the Typhoon G for aerial photography. It provides more control and steeper bank and pitch angles, helping open your work up to a greater variety of possible shots

Home Mode

This safety feature can be activated at any time with the simple flip of a switch on the ST10+. When activated, the Typhoon G will automatically return to its «home point» and land within a 10′ circle of where it took off. If for whatever reason the transmitter signal is lost, Return Home will take over and fly the Typhoon G back to the home point until it lands or the signal is restored

Note: Proper GPS calibration is required to ensure this feature works correctly

Follow Me

With this mode, the gimbal keeps the camera trained on the operator holding the ST10+

Includes CGO SteadyGrip

Transform the GoPro HERO camera and gimbal into a handheld, stabilized mini-rig with the included CGO SteadyGrip. It features a smartphone holder for iOS and Android devices that have screens up to 6.4″ so that you can use the app to monitor a live feed and operate camera settings (5.8 GHz Wi-Fi support on the mobile devices is required). The gimbal slides on with rail attachment for quick setup and draws its power from six AA batteries that are housed in the base (batteries available separately). A pitch control roller on the top of the handgrip allows you to manually adjust camera tilt while shooting

Note: This version of the SteadyGrip is not compatible with the CGO3 camera